Drolet Deco Nano Wood Stove - DB03215

SKU: DB03215
filler

Price:
Sale price$999.00

Description

Drolet Deco Nano Wood Stove - DB03215

The Deco Nano can heat up to 1,200 ft² with 45,000 BTU/h of maximum power. EPA-certified at 1.8 g/h, this non-catalytic wood stove stands out with its modern design, its higher-than-average height, and its practical storage space under the appliance. The bottom of its combustion chamber is deeper than other models in its category and allows a greater accumulation of ashes, and thus able to empty them less frequently.

Included: pedestal with log storage, top air deflector, ceramic glass, cast iron door with adjustable hinges, ash lip, air damper, stainless steel heat shield

Options: blower, thermodisc, firescreen, fresh air intake kit

SPECIFICATIONS:

Fuel type Dry cordwood (16" recommended)
Recommended heating area (9) 250 - 1,200 ft²
Overall firebox volume 1.7 ft³
EPA loading volume 1.55 ft³
Maximum burn time (9) 5 h
Maximum heat output-dry cordwood (4) 45,000 BTU/h (13.19 kW)
Minimum overall heat output rate (4) (5) 12,124 BTU/h (3.55 kW)
Maximum overall heat output rate (4) (5) 26,700 BTU/h (7.83 kW)
Average overall efficiency-dry cordwood (HHV) (5) (6) 74 %
Average overall efficiency-dry cordwood (LHV) (5) (7) 79 %
Optimum efficiency (1) (2) 80 %
Optimum heat transfer efficiency (8) 79 %
Average particulate emission rate (3) 1.8 g/h
Average CO (10) 74 g/h
Size Small
Alcove installation approved Yes
Mobile home approved Yes, with fresh air intake
Premium quality blower included (CFM) Optional
Certified according to applicable standards By an accredited laboratory (CAN/USA)
Combustion technology Non-catalytic
Stainless-steel secondary-air system Yes
Flue outlet diameter 6"
Distance-center of the flue outlet to back unit 6 5/8"
Distance-center of the flue outlet to side unit 9 1/4"
Chimney diameter 6"
Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height 12'
Overall dimension (Width) 18 1/2"
Overall dimension (Depth) 32 1/2"
Overall dimension (Height) 29 1/8"
Door type Single, glass with cast iron frame
Door opening size (Width) 12"
Door opening size (Height) 7 5/8"
Glass type Ceramic glass
Glass surface - W x H 10 1/4" x 8 3/4"
Firebox size (Width) 14 1/4"
Firebox size (Height) 11 3/4"
Firebox size (Depth) 19 1/8"
Maximum log length 17"
Log positioning Loading over depth
Firebox lined with refractory bricks Yes
Baffle type High quality vermiculite
High-efficiency certified appliance Yes, EPA 2020 approved
Canadian Standard (emissions) CSA B415.1-10
USA Standard (emissions) EPA
Canadian Standard (safety) ULC S627
USA Standard (safety) UL 1482, UL 737
Steel thickness-body 3/16"
Steel thickness-top 1/4"
Warranty Limited lifetime
Shipping weight 281 lb (128 kg)


CLEARANCE TO COMBUSTIBLES*
(Applies to 84" ceiling installation only)
  United-States
  Single wall pipe Double wall pipe
Clearance – back wall 12" 6"
Clearance - corner 11" 7"
Clearance – side wall 18" 18"
Clearance – top (measured from the platform on which the appliance is installed)** 84" 84"

*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogs, flyers, magazines, and/or websites).


**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

(1). Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

(2). Optimum overall efficiency at a specific burn rate (LHV).

(3). This appliance is officially tested and certified by an independent agency.

(4). The maximum heat output (dry cordwood) is based on a loading density between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(5). As measured per CSA B415.1-10 stack loss method.

(6). Higher Heating Value of the fuel.

(7). Lower Heating Value of the fuel.

(8). The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

(9). Recommended heating area and maximum burn time may vary subject to location in the home, chimney draft, heat loss factors, climate, fuel type, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

(10). Carbon monoxyde.


PRODUCT MANUALS:

Expert Advice

Call (800) 441-9246
Schedule a VIP Consultation call with a specialist for FREE!

Amazing Value Every Day

All things home, all in one place. Our mission is to build your dream home with brands all across the nation. Our trained team is on hand seven days a week. Call us to schedule a live VIP Consultation call for free

Why Shop At Morealis?

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You may also like